# What Is a Hot Mop Shower Pan? See One Built, Step by Step | Valley Home Construction

A hot mop shower pan is the waterproof layer under your shower tile. See one built on a Sacramento-area job, and what California

Source: https://www.valleyhomeconstruction.com/blog/hot-mop-shower-pan/

Home / Blog / Hot mop shower pans

## What is a hot mop shower pan?

Valley Home Construction · Nov 16, 2026

the part of your shower nobody sees

THE QUICK ANSWER

What is a hot mop shower pan?

It's the waterproof layer under your shower tile: hot tar and felt paper over a sloped cement floor, filled with water to test it before tile.

- You won't see it again once the tile goes in.

- A failed pan is often why a shower leaks. The wood under it rots.

- On our jobs: 2 layers of felt and tar, and a drain made for hot tar.

- Code: 2 inches of water for 15 minutes. Ours sit about a day.

- Corners, pipes and the drain are where pans leak.

Get my free estimate →

Who it's for Sacramento-area homeowners planning a new shower, or anyone who's had a shower leak before
What you get A real hot mop job, step by step, in photos from our crew, plus the code rules it has to meet
Who's answering Valley Home Construction, in business since 1995 and owned by Ed Lane. CSLB #982830

## The basics What is a hot mop shower pan?

It's the waterproof layer under your shower floor. Before any tile goes in, the hot moppers mop scalding hot tar onto the floor and up the walls, and lay felt paper into it while it's still wet. On our jobs, that's 2 layers of felt and tar.

When it cools, you've got one sealed layer hiding under the tile. You never see it again once the shower's done. That's why it matters so much. Any water that soaks down through the grout lands on the pan, and the pan sends it to small weep holes in the drain (California's code requires them) instead of into your subfloor.

Ed Lane, who owns Valley Home Construction, sent us photos and videos from a recent job: a master bath and a hall bath in the same house. Then he answered our questions about how a pan gets built, and what happens when one fails.

## Why it matters What happens when a shower pan fails?

The wood under it rots. When we tear out a leaking shower, the pan is often the reason. "In a lot of cases, if the shower is leaking, it's because of a failed hot mop or waterproofing of some kind," Ed told us. "We typically find rotten wood, and sometimes all the way down into the joists."

On one recent job, the homeowner's first clue was a soft floor just outside the shower. When we pulled the tile up, the subfloor under it was rotten and had to be replaced. The pan was rotten too. Had the paper torn, or had the tar failed? "Hard to tell at that point, because it had been years," Ed said.

That's the trouble with a bad pan. It leaks slowly, under the tile, where nobody's looking, until the floor next to the shower goes soft.

## Step 1 How does a shower get ready for the hot mop?

Our crew gets the floor and walls ready first. We put in the plumbing, the plywood, and the blocking around the shower. Then the hot moppers come in.

Water has to run to the drain, even under the tile, so the pan needs a slope. "The hot moppers create the slope," Ed said. They pack a cement bed that slopes down to the drain from every side, and the tar goes on top of it.

California's plumbing code spells out the slope. The waterproof lining has to be "pitched ¼ inch per foot" toward the drain, over "a smooth and solidly formed subbase" ( California Plumbing Code 408.8 ). That cement bed is the subbase.

the cement slope, before the tar

## Step 2 What happens when the hot tar goes down?

The tar gets heated in a kettle on the truck, outside the house. It comes in by the bucket and gets mopped across the floor and up the walls while it's still liquid. "This is waterproofing with scalding hot tar," Ed wrote when he sent us the videos. "When I say it's scalding hot, that's not the bacon you hear crackling."

Then the felt paper goes in. In Ed's words: "Then layers of paper as they put the scalding hot tar in between." Tar, felt, tar, felt. On our jobs, 2 layers go down, one right after the other, with no wait in between.

One thing homeowners don't expect is the smell. "They don't understand the smell of the hot mop is very pungent," Ed said. Plan to be out of the house that day if you can.

hot tar and felt, layer by layer

★★★★★

"Ed Lane and his team displayed exceptional professionalism and craftsmanship... The team is incredibly skilled, friendly, and communicative, making the whole process smooth and stress-free."

James Google review Free estimate →

## Step 3 Where does a shower pan leak?

Anywhere something breaks through it. "All penetrating areas matter, period," Ed told us. The corners count, where the floor meets two walls and the felt has to fold without a gap. So does the drain, where a pipe goes straight through the pan.

"It might seem like anybody can do it," Ed wrote, "but they cut this paper with precision."

At the drain, we don't use a regular one. "There's a special hot mop drain that we install, to ensure no leak," Ed said. The reason is simple: "It will not melt with the temperature of the tar."

Building departments watch the same spots. Placer County's shower pan handout calls for each layer of felt to be made watertight "by lapping and flashing," with woven glass fiber webbing "hot mopped in place and extending 4 inches in all directions from each corner" ( Placer County Building Services ).

The code also says how high the lining has to go. It has to run up the walls at least 3 inches above the top of the shower's curb or threshold, and wrap over the curb itself ( California Plumbing Code 408.8 ). If water ever splashes past the curb, it still lands on the pan.

## Step 4 Why do we fill the shower with water before tiling?

To prove it holds before anything covers it. "You plug the shower pan drain and fill it with water," Ed said. "It sits for approximately a day. And we look for any leak."

California's code sets the minimum: fill it "to a depth of not less than 2 inches" for "not less than 15 minutes" ( California Plumbing Code 408.8.5 ). Ours sit for about a day.

We pull a permit on every shower job, so the inspector sees it too. "He looks at the pan full of water, after it has been hot mopped," Ed said. That happens before any tile goes on.

Has one of Ed's pans ever failed that test? His answer was one word: "No."

Ed sent the photos from this job: "Master bathroom Hot Mop complete, water filled." Then the hall bath, same thing.

both pans, filled with water

★★★★★

"I especially appreciated the daily communication & updates as the project progressed."

Anna Marie Google review Free estimate →

## Your checklist How do you know your builder got the pan right?

You can't see the pan once the tile's in, so ask before it's covered:

- How many layers of felt and tar go down?

- What kind of drain goes in, and will it hold up to the hot tar?

- Will you fill the pan with water before tile, and how long will it sit?

- Will the inspector see the pan full of water before it's covered?

- Can you send me a photo of the pan before it's covered?

On our jobs: 2 layers, a hot mop drain, about a day in the water, and the inspector sees it full.

KEY TAKEAWAYS

## What to know about hot mop shower pans

- The pan is the waterproof layer under your shower tile.

- A failed pan leaks slowly. The first sign can be a soft floor just outside the shower.

- The hot moppers build the slope, then put down 2 layers of felt and tar on our jobs.

- Every spot where something goes through the pan matters, the drain most of all.

- California code requires a water test before tile: 2 inches, 15 minutes minimum. Ours sit about a day.

- Ask your builder how many layers go down and how long the water test runs.

QUESTIONS

## Questions people ask about hot mop shower pans

**What is hot mopping? +**
It's a way to waterproof a shower floor. The hot moppers mop hot tar onto the floor and walls and lay felt paper into it, so it cools into one sealed pan under the tile.

**How many layers go into a hot mop shower pan? +**
On our jobs, 2 layers of felt and tar, one right after the other with no wait in between.

**How is a shower pan tested? +**
The drain gets plugged and the pan gets filled with water. California's plumbing code says at least 2 inches deep for at least 15 minutes, with no leaks, before anything covers it. On our jobs, the water sits for about a day, and the inspector sees the pan full.

**What are the signs a shower pan has failed? +**
Often a soft floor just outside the shower. By the time you notice, the wood under the pan may be rotten, sometimes down into the joists. That's what Ed Lane finds when he tears out a leaking shower.

**Is hot mop better than a plastic liner? +**
California's code allows several linings, including sheet plastic, lead, copper, or other durable watertight materials, so we won't rank them. Hot mop is what we use, and Ed says none of his pans has failed a water test.

**Where does a hot mop shower pan usually leak? +**
Anywhere something breaks through it: the corners, pipes and the drain. We use a special hot mop drain that won't melt under the hot tar. Placer County's shower pan handout also calls for extra reinforcement at every corner.

1,000+

Sacramento projects completed

Free estimate →

★★★★★ 4.9 on Google

**## How we verified this page What we checked, what we couldn't, and who read it. Published by Valley Home Construction Checked Nov 16, 2026 4 sources Reported with AI +**

### What this page is for

It shows what a hot mop shower pan is, using photos from our own job, and prints what California's plumbing code says the pan has to pass.

### Who we wrote it for

A Sacramento-area homeowner planning a new shower, or someone who's had a shower leak and wants to know what should be under the tile. It doesn't cover shower pans that use other waterproofing methods in detail.

### Our lens

We're Valley Home Construction, a licensed Sacramento general contractor. We make money when a homeowner hires us, so we have a reason to show you the careful parts of our work. We printed the code's own words so you can check them yourself.

### Key facts

Fact Detail Source, checked

Slope of the lining "Pitched ¼ inch per foot" to the drain, over a smooth, solid subbase 2025 California Plumbing Code 408.8 , Oct 7, 2026
How high the lining goes At least 3 inches above the top of the finished curb or threshold 2025 California Plumbing Code 408.8 , Oct 7, 2026
The water test At least 2 inches of water for at least 15 minutes 2025 California Plumbing Code 408.8.5 , Oct 7, 2026
Corner reinforcement Woven glass fiber webbing, hot mopped in place, 4 inches out from each corner Placer County Building Services shower pan handout , Oct 7, 2026
Valley Home Construction's license CSLB #982830, general building contractor CSLB license lookup
In business since 1995, in the Sacramento area Valley Home Construction's website
Our water test About a day, and no pan has failed it Ed Lane, interview with Valley Home Construction, Nov 16, 2026
Layers on our jobs 2 layers of felt and tar, no wait between them Ed Lane, interview with Valley Home Construction, Nov 16, 2026

### How we researched it

We read the 2025 California Plumbing Code shower receptor sections and Placer County's shower pan handout on Oct 7, 2026. Ed Lane's quotes come word for word from his texts to us on Oct 7, 2026, and a recorded phone interview on Nov 16, 2026, cleaned for spelling. The photos are from that job, shown with his OK.

### What we couldn't verify

The 2 layers and the day-long water test are how Ed's jobs do it. Other installers do it differently. Ed answered our questions on Nov 16, 2026, but hasn't read this finished page yet.

### Decisions we made

- We printed the state code's minimums in its own words so you can check them.
- We kept the hot mop crew's name off the page.
- We didn't rank hot mop against other waterproofing methods, since the code allows several.
- We didn't print how long a hot mop pan lasts. Ed's never had one fail, but we don't have a number we can back.

### Who wrote it

Reported with AI. Draws on owner Ed Lane's texts and job-site photos from Oct 7, 2026, and his recorded phone interview on Nov 16, 2026. Every claim checked against its source. Published by Valley Home Construction. Ed Lane hasn't reviewed this finished page yet.

### Dates

- Published Nov 16, 2026
- Last checked Nov 16, 2026
- Check again by May 16, 2027

### Changes and corrections

- Nov 16, 2026: rebuilt from Ed Lane's recorded interview.

### Sources

- 2025 California Plumbing Code, sections 408.8 and 408.8.5 , checked Oct 7, 2026.
- Placer County Building Services, "Shower Pan" handout (2022 California Building Standards Code) , checked Oct 7, 2026.
- Ed Lane, Valley Home Construction, texts and photos, Oct 7, 2026.
- Ed Lane, Valley Home Construction, recorded phone interview, Nov 16, 2026.

### Planning a remodel in Sacramento?

Know what you'll pay before work starts. We give you a written estimate, and design is included.

Get your free estimate →
or call (916) 375-8800
★★★★★ 4.9 on Google
SINCE 1995 CSLB #982830 BBB A+ 1,000+ PROJECTS

On this page
Who's answering
Read next

- The quick answer

- What a hot mop pan is

- What a failed pan does

- Getting the floor ready

- When the hot tar goes down

- Where pans leak

- The water test

- How to check your builder

- Key takeaways

- Questions people ask

Valley Home Construction
Sacramento remodeler, owned by Ed Lane

We design, price and build kitchens, bathrooms, additions and whole-home remodels across the greater Sacramento area. In business since 1995, CSLB #982830.

1995 in business since 1,000+ Sacramento projects 4.9 ★ on Google reviews
More about how we work →

Do I need a permit to remodel a bathroom in Sacramento County?
How long does a bathroom remodel take?
What red flags mean I should walk away from a contractor?
See every article →

FREE IN-HOME CONSULTATION · DESIGN INCLUDED

## Want a licensed crew and a clear price before work starts?

One call gets you a free in-home consultation, a written estimate and a start date. If the job changes, you'll see the new price in writing before we do the work.

Get your free estimate →
Call (916) 375-8800

SINCE 1995 1,000+ SACRAMENTO PROJECTS CSLB #982830 BBB A+ 4.9 ★ ON GOOGLE
